Sega FORD RACING TWIN-FULL BLOWN, Руководство по обслуживанию

Страница: 67 / 111

62
16. COIN SELECTOR
HANDLING COIN JAMS
If the coin is not rejected when the REJECT button on the COIN CHUTE DOOR is pressed, open
the COIN CHUTE DOOR and open the selector gate. After removing the jammed coin, put a
normal coin in through the COIN ACCEPTOR and check to see that the selector correctly functions.
CLEANING A MECHANICAL COIN SELECTOR
•
Remove and clean smears by
using a damp soft cloth.
•
Never apply oil, etc. to the
Coin Acceptor.
•
After cleaning the Coin
Acceptor, insert a regular coin
in the normal working statud
and ensure that the Selector
correctly functions.
The Coin Acceptor should be cleaned once every 3 months.
When cleaning, follow the procedure below.
1. Turn the power for the machine to the OFF position
and open the Coin Chute Door.
2. Open the Gate and dust off by using a damp lint free
cloth.
3. Remove and clean smears by using a soft lint free
cloth dipped in water of mild detergent and squeezed
dry.
4. Remove the cradle. When removing the retaining
ring, be very careful so as not to bend the rotary
shaft.
5. Remove any foreign bodies from the rotary shaft and
pillow portions by wiping off the cloth.
6. After wiping off as per previous instruction, apply a
dry lint free cloth to dry the affected areas properly.
CLEANING A MECHANICAL COIN SELECTOR
Once every month, when performing the Coin SW Test,
simultaneously check the following.
•
Does the Coin Counter count satisfactory?
•
Does the coin drop into the cashbox correctly?
•
Is the coin rejected when inserted while keeping the
Reject Button is pressed down?