Sega FORD RACING TWIN-FULL BLOWN, Руководство по обслуживанию

Страница: 61 / 111

56
13.2. REPLACING AND ADJUSTING THE HANDLE’S V.R.
•
Never touch places or parts other than those specified. Touching places not specified
may cause electric shock or a short circuit hazard.
•
After the replacement or adjustment of the steering V.R., be sure to set the centering
value of the V.R in test mode.
REPLACING THE V.R
1. Turn off the power.
2. Disconnect the connectors.
3. Take out the screws which secure the V.R bracket and remove.
4. Remove the screws which retain the gear to the V.R.
5. Reconstruct in reverse order.
6. After replacing the V.R., perform the adjustment in CALIBRATION TEST.
ADJUSTING THE VOLUME
1. In the CALIBRATION TEST, have the steering calibration test active.
2. Loosen the two screws which secure the bracket to disengage gears.
3. With the steering in the centre position, revolve the gear which is secured to the V.R to the centre
position.
4. Realign the gears and secure the bracket.
5. Perform V.R settings in the CALIBRATION TEST.