Sega FORD RACING TWIN-FULL BLOWN, Руководство по обслуживанию

Страница: 23 / 111

18
C
C
SECURING THE MACHINE INTO LOCATION
•
Make sure that all of the adjusters are in contact with the floor. If they are not, the
cabinet may move and cause an accident or injury.
•
Be sure to use two people to perform this work. Depending on the specific work,
there are some cases in which working by one person alone may cause an accident
or injury.
The machine has 14 casters (7 per unit) and 16 leg adjusters (8 per unit). When the
installation position is determined, bring the adjusters in contact to the floor. Make the
adjustment so that the casters rise from the floor approximately 5mm. Also make sure that
the machine positioning is level.
Step 1.
Move the machine to the
installation position. When
installing the machine against or
close to a wall, be sure to secure a
space to ensure player can safely
enter and exit the machine without
obstruction.
Step 2.
Bring all leg adjusters down to
make contact with the floor. Using
a Wrench or spanner adjust the
leveller so that the casters rise
approximately 5mm from the floor.
Step 3.
Once all adjusters have been
adjusted and the machine is made
level, fasten the adjuster nut
upwards to secure the height of the
adjuster.
After securing the height of the adjusters, tighten all of the hexagon bolts which were fastened temporarily
as per step 1.