74
22. NETWORK
PLAY
Up to 3 twins (6 seats) can be linked for network play. Properly connected network cables and correct
network play settings are required for network play.
•
Before starting to work, ensure that the Power SW is OFF. Failure to observe this can
cause electric shock or short circuit.
•
Use care so as not to damage wiring. Damaged wiring can cause electric shock or
short circuit.
•
Do not touch undesignated places. Touching places not designated can cause
electric shock or short circuit.
•
This work should be performed by a Qualified Service Personnel. Performing work by
a non qualified person can lead to an electric shock or short circuit hazard.
•
When linking a number of machines, be sure to apply sufficient power for the
corresponding number of machines. Be sure to secure the correct current per
machine as stated in this manual. Failure to observe this can cause fire and or
electric shock.
•
Due to the length of network cable, the distance in between the machines is limited.
However, to avoid accidents, be sure to secure space in excess of 70cm between
machines.
•
To perform work safely and avoid serious accident such as the machine cabinet
toppling over, do not perform work in places where step like grade differences exist.
•
To avoid accidents, use a cable cover that will not cause patrons to trip.
•
Network play is not possible between games of different types.
•
When setting the cabinet positions in the NETWORK TEST MENU the cabinets
MUST number sequentially from left to right. If two or more cabinets share the same
NETWORK ID they will only operate as a single player game until set correctly.
•
In the case of a Network Failure due to either Hub or Lan Cable error, the player will
still be offered Single/Multiplayer game. If Multiplayer game is selected the
connection will time out while “Waiting for other players” and default to the single
player mode. If the machine is powered off and on again during Hub or Lan cable
error, only single player game will made available until the network link is restored.
Содержание FORD RACING TWIN-FULL BLOWN
