Sega FORD RACING TWIN-FULL BLOWN, Руководство по обслуживанию

Страница: 10 / 111

5
2. PRECAUTIONS REGARDING LOCATION AND INSTALLATION
This product is an indoor amusement machine. Do not install it outside. Even indoors, avoid
installing in places mentioned below sp as not to cause a fire, electric shock, injury and or
malfunction.
•
Places subject to rain or water leakage, or places subject to high humidity in the
proximity of an indoor swimming pool and or shower, bath etc.
•
Places subject to direct sunlight, or places subjected to high temperatures such as in
the vicinity of heating units, etc.
•
Places filled with inflammable materials or chemicals or any hazardous matter.
•
Dusty places.
•
Sloped surfaces.
•
Places subjected to any type of violent impact.
•
Vicinity of anti-disaster facilities such as fire escapes and fire extinguishers.
•
The operating (ambient) temperature range is from 5 degrees centigrade to 40
degrees centigrade. Only in the cases where a projector is employed then the
temperature drops from 40 to 30 degrees centigrade.
•
This appliance is not suitable for installation in an area where a water jet could be
used
LIMITATIONS OF USAGE REQUIREMENTS
•
Be sure to check the electrical specifications. Ensure that this product is compatible
with the locations power supply voltage and frequency requirements. A plate
describing the electrical specifications is attached to the product. Non-compliance
with the electrical specification can cause fire or electrical shock.
•
This product requires a RCD as part of the location facilities. Using them in a manner
not independent can cause an electric shock or a fire.
•
Ensure that the indoor wiring for the power supply is rates at 7A or higher in areas
using 220 – 240VAC. Non-compliance with this may cause electric shock or a fire.
•
Be sure to independently use the power supply equipped with an Earth leakage
breaker. Using a power supply without an Earth leakage breaker can cause a fire
when earth leakage occurs.
•
Putting many loads on one electrical outlet can cause a generation of heat and a fire
may result from an overload.
•
When using an extension cord, ensure that the cord is rated at 7A or higher. Using a
cord rated lower than the specified rating may cause a fire or electric shock.