
48
transport locks.
• Operate the device with 220 – 240V~/
50/60 Hz AC voltage only. All power
supply cables that are damaged must be
replaced by a qualified specialist (elec-
trical engineer). Do not use power strips,
multiple sockets or extension cords to
connect the device to the power supply.
• You need a power socket that is properly
grounded and exclusively assigned to the
device. The socket must be fused with a
10 A fuse or higher. Failure to do so may
result in dangerous accidents or equip-
ment damage.
• The mains plug and the earthed socket
must always be easily accessible after the
device has been installed.
• Make sure that the power cable will not
be damaged when located under the
device or when moving the device.
• The technical data of your electrical
supply must correspond with the values
stated on the rating plate.
• Your house circuit must be equipped with
a circuit breaker for emergency shutdown
of the device.
• Do not undertake any changes to the