Seepex Macerator 110 Series, Необязательная инструкция по эксплуатации и сборке

Страница: 16 / 111

11
Ausgabe
issue
B / 10.09.2007
Dokument
document
OM.INS.02en
Blatt
sheet
1 (2)
5
Assembly / Installation
5.1 Mounting tools/Lifting gear
5.2 Space requirements.
Define space requirements under consideration of the following factors:
• Dimensions and weight.
• Required transport and lifting gear.
• Pipeline course
5.2.1 Heavy solid collection separator
5.3 Installing the fully assembled macerator.

as per technical data (Chapter 3).

Observe dimensional drawing.
Zero-potential assembly of macerator

Even out unevenness with suitable underlay.
• Applies to assembly on foundations/bearing-type fixtures.
• All surfaces of macerator contact surfaces rest on foundation/bearing-type fixture.
Correct seat of drives
• All drives are aligned and assembled ready for operation.
• Align/fasten drive unit if the drive has been shifted during transport/installation of the mac-
erator.
CAUTION
Macerator falling.
Slight injury or damage to property may occur.

Observe sling points for lifting device.

Observe dimensions, weights and center of gravity.

Use suitable mounting tools/lifting gear.
NOTICE
Heavy components that cannot be chopped (e.g. metals, stones)
Damage to the cutting tools

Separate components prior to entry

Connect seepex heavy solid collection separator upstream

Open emptying flap and remove solids.
CAUTION
Safety and protective devices
Slight injury or damage to property may occur.

Attach protective device and put into operation.