Seepex Macerator 110 Series, Необязательная инструкция по эксплуатации и сборке

Страница: 28 / 111

23
Disassembly /
Re-assembly
Ausgabe
issue
A / 26.07.1999
Dokument
document
OM.CHD.04e
Blatt
sheet
1 (3)
Table of contents:
1.0 Disassembly
2.0 Reassembly
3.0 Lubrication
The sectional drawing "Headstock Assembly" and
parts list can be taken from Point 9.
Mounting tools
Some mounting tools are required for the disassembly
and reassembly. Refer to the document OM.SPT.__
regarding these tools.
1.0
Headstock Assembly - Disassembly
1.1
Headstock (905)
1.2
Shear Plate (900)
1.3
Shaft Sealing (SEA)
Disassembly of the shaft sealing see document
OM.SEA.__.
1.4
Drive Shaft (102)
After disassembly of the lock nut (106) and locking
plate (107) the drive shaft (102) will be pressed out of
the bearing housing (100).
2.0
Headstock Assembly - Re-assembly
2.1
Bearing Housing (100)
Check lip seal (127) for damage / replace it if
necessary, press it in and fill it with grease
1)
. Press in
the external bearing rings (151 and 104).
2.2
Drive Shaft (102)
Press the internal bearing ring onto the drive shaft
(102) and fill it with grease
1)
.
Cover the thread (G) on the drive shaft (102) with a
bonding sheet to protect it against damage during the
further assembly.
Before re-assembly fill the internal bearing ring (104)
with grease
1)
.