Seepex Macerator 110 Series Скачать руководство пользователя страница 62

Страница: 62 / 111

Ausgabe
issue

D / 06.01.2014

Dokument
document

OM.SAF.01e

Blatt
sheet

1 (4)

Safety

1.1

General notes

Always keep the operating and maintenance instructions close by the machine.

If problems cannot be solved with reference to the operating and maintenance instructions,
please contact the manufacturer.

Observe the following points in addition to these operating and maintenance instructions:

•

Prohibition, warning and mandatory signs, warning notes on the machine

•

Relevant laws and ordinances

•

Statutory provisions on accident prevention

•

Corresponding harmonised standards and regulations

1.2

Safety and warning notes

Comply with safety and warning notes for safe and efficient use of the product.

Signal words for specific dangers and (possible) consequences are explained below. These
are supplemented by symbols (pictograms) if necessary.

1.2.1 Warning notes

1.2.2 Danger symbols

NOTICE

Caution for machine!

Possible danger.
Material damage can occur.

CAUTION

Caution for people and machine!

Possible danger.
Minor injury or damage to property can occur.

WARNING

Warning for people!

Possible danger.
Death or serious injury can occur.

DANGER

Danger for people!

Possible danger.
Immediate risk of sever or fatal injury.

Warning:
Suspended load.

Warning:
Dangerous electrical
voltage.

Содержание Macerator 110 Series
















































































































Результаты поиска

Содержание Macerator 110 Series

Отзывы:

Похожие инструкции для Macerator 110 Series

Бренды по названию

Популярные бренды

Seepex Macerator 110 Series, Необязательная инструкция по эксплуатации и сборке

Результаты поиска

Содержание Macerator 110 Series

Отзывы:

Похожие инструкции для Macerator 110 Series

Бренды по названию

Популярные бренды