Seepex Macerator 110 Series, Необязательная инструкция по эксплуатации и сборке

Страница: 8 / 111

3
Ausgabe
issue
D / 06.01.2014
Dokument
document
OM.SAF.01e
Blatt
sheet
3 (4)
1
Safety
1.5.1 Tasks and information for the owner/operators
¾
Regularly check and maintain the machine, replacing all parts in good time which no longer
guarantee safe operation.
¾
It is essential to comply with the procedure described in the operating instructions for shut-
ting down the machine.
• On completion of work, attach all safety and protective devices and make sure they are
functioning.
1.5.2 Safety notes for maintenance, inspection and assembly work
¾
Do not work on the machine or system unless it is stationary and depressurised.
¾
Switch off the master switch and pull out the power plug before starting work on live com-
ponents.
¾
Comply with the procedure for shutting down the machine as described in the Shut-down
chapter.
¾
Decontaminate (de-toxify) machines that are used for pumping media that can be harmful
to health.
¾
Refer to the Initial start-up chapter before repeated start-up of the machine.
1.6 Personal protective equipment
¾
Wear personal protective equipment and/or additional equipment for your own safety.
¾
Avoid/limit risks by the use of collective technical protective equipment or by organisational
measures at work.
1.7 Safety and protective devices
¾
Prior to start-up, bolt seepex machines onto a concrete foundation so as to ensure stability.
¾
Starting and stopping devices must be clearly recognisable. Take appropriate measures to
avoid defects.
• No protective device is necessary for checking and/or setting the shaft seal.
• Hot surfaces are identified with a danger symbol on the machine.
1.8 Foreseeable misuse
Serious personal injury and damage to property can be caused by:
• Incorrect use
• Incorrect installation or operation of the machine
• Impermissible removal of necessary protective equipment