BREEZAIR EXQ/EZQ/EXS EVAPORATIVE COOLERS INSTALLATION MANUAL
|
5
Note!
Some nails protruding from the timbers may
be added to help locate them. For roof slopes greater
than 45° add 15mm (0.6”) packer to top gauge.
PREPARING THE DROPPER
Cut a 50mm (2”) diameter cable exit hole in the dropper then
fit and screw the cable grommet into position. Locate the
hole so the cables will not interfere with the operation of
the Weatherseal.
Before transporting to the roof, temporarily screw the
transition to the dropper using a screw in each corner.
Affix gauge timbers under the top and bottom edges
of the transition with 30mm (1.2”) screws supplied
ILL1646-A
ILL951-B
EXTRA NOTES FOR EZQ MODEL ONLY
MOUNTING THE DROPPER
EXQ/EXS MODEL
EZQ MODEL
ILL1647-A
ILL182-H
Install the dropper and securely fix it to the roof structure on 3
sides. This may require the addition of extra structural timber.
Important!
The dropper must never sit directly on any ceiling
joists or beams, as this may cause noise or vibration issues,
and possible ceiling damage.
