SecurityMan IPCAM-SD Скачать руководство пользователя страница 93

Страница: 93 / 147

• Normal Ope

n – used when the input device is normally open status by

default, please reference the input device specification.

If you are unsure of the specification please use the

default setting Normal Open.

• Normal Closed

– use when the input device is normally close status by

default, please reference the input device specification.

INTERVAL

The INTERVAL is the time frame to dictate when the IPcam-SD should start

recording whenever an alarm input event occurs. For example, if an event

occurs at 5:00:00 pm and you have the interval set to 15 seconds, the actual

recording will not take place until 5:00:15 pm.

NOTE:

Please take into consideration that the Interval time will be

subtracted from the “Pre-Record” time frame. The system default setting is

interval 1 second, the earliest the system can start to record on an event. To

extend the event start time to record please set to a higher value.

DELAY

The DELAY (post-record) time frame lets you dictate how much longer the

IPcam-SD should keep recording after its default 10 second (per camera

failure event) recording has expired. For example, if a camera failure event

occurs at 5:00:00 pm and you have the delay time set to 15 seconds, the

actual recording will not stop until 5:00:35 pm (10 second d 15

second delay).

COPY

The COPY button can be used to copy the current configuration on the

screen to the other cameras available through the CMS (when more than one

camera is available).

PASTE

The PASTE button is used to paste the configuration settings that were

copied to the selected camera.

REFRESH

The REFRESH button discards the changes you made to the current settings

and sets them back to the way they were when the configuration window

was first opened.

The OK button saves your changes and exits back the previous screen.

CANCEL

The CANCEL button discards any changes made and exits back to the

previous screen.

• • • •ALARM OUTPUT

The ALARM OUTPUT sub-menu located in the “Alarm” menu option consists

of 5 settings that are used to configure the IPcam-SD’S alarm output port.

These settings are:

• A. Configuration

- operates on the configuration settings that are being

used on for the alarm input.

• B. On -

enables the alarm output port based on a 24hr default settings.

Содержание IPCAM-SD




















































































































































Результаты поиска

Содержание IPCAM-SD

Отзывы:

Похожие инструкции для IPCAM-SD

Бренды по названию

Популярные бренды

SecurityMan IPCAM-SD, Руководство пользователя

Результаты поиска

Содержание IPCAM-SD

Отзывы:

Похожие инструкции для IPCAM-SD

Бренды по названию

Популярные бренды