SecurityMan IPCAM-SD Скачать руководство пользователя страница 119

Страница: 119 / 147

115

SNAPSHOT

The SNAPSHOT option is used to convert the selected partition into a

snapshot partition. A snapshot partition is required for the IPcam-SD to take

and store snapshot pictures when an event occurs. To set up a Snapshot

partition, simply highlight the partition and then click on the Snapshot button

and follow through with the conversion. A window will pop up to confirm the

operation, please click OK to confirm or CANCEL to cancel.

FORMAT DISK

The FORMAT DISK option is used to format the SD card being used in the

IPcam-SD. Please keep in mind that formatting disk will DELETE everything,

all video footage, all snapshot pictures from the partition(s)/drive and it

CANNOT be recovered. Only proceed with disk formatting if you are sure that

you won’t need any file(s) out of the partition or drive. A window will pop up

to confirm the operation, please click OK to confirm or CANCEL to cancel.

NOTE:

It is highly recommended that you always format a newly installed

micro SD card to insure that it is formatted to the cameras specifications.

During formatting, the software may take a few minutes depending on

the size of the SD card being formatted, please be sure to wait until the

formatting process is complete before clicking on other options.

PARTITION

The PARTITION option is used to divide up the SD card into different between

read/write and snapshot partitions. To start partitioning, click on “Partition”

button. A window will appear displaying “Record Partition” and “Image

Partition” in Megabyte. Simply input in the value in megabyte and click OK

and OK again to proceed with the partition as illustrated below.

NOTE:

Partitioning the SD card require some times, please wait for the

system hour glass to stop before proceeding. After partition is complete, the

IPcam-SD is required to reboot for the partitions to take affect.

Содержание IPCAM-SD




















































































































































Результаты поиска

Содержание IPCAM-SD

Отзывы:

Похожие инструкции для IPCAM-SD

Бренды по названию

Популярные бренды

SecurityMan IPCAM-SD, Руководство пользователя

Результаты поиска

Содержание IPCAM-SD

Отзывы:

Похожие инструкции для IPCAM-SD

Бренды по названию

Популярные бренды