Security Chimneys International LE LAVAL Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 39

Security Chimneys International LE LAVAL Скачать руководство пользователя страница 3

1

1.

SAFETY RULES FOR OPERATING YOUR FIREPLACE
MODEL LE LAVAL

Warning

: The LE LAVAL fireplace

must be installed with an outside air kit intake

, which is

included with the fireplace.

Warning:

The fireplace must be operated with the doors fully opened or fully closed. If the

doors are left partly opened, smoke may be drawn into the room. If the unit is operated with the
doors fully opened, the fire screen must be used.

Warning:

For spectacular fire view and optimum efficiency of your fireplace, we recommend

that the wood be placed as far back as possible in the fireplace.

When  cleaning  the  fireplace,  the  ashes  should  be  placed  in  a  metal  container  with  a  tight
fitting lid.  The closed container of ashes should be placed on a non-combustible floor or on
the ground outside the house, pending final disposal.  If the ashes are disposed of by burial in
soil  or  otherwise  locally  dispersed,  they  should  be  retained  in  the  closed  container  until  all
cinders have thoroughly cooled.

Caution:

Do not block the hot air vents on the fireplace as this will cause the fireplace to
overheat.

Caution:

Never use gasoline, kerosene, charcoal lighter fluid or similar liquids to start or
rekindle a fire in this fireplace. Keep all such liquids well away from the fireplace at
all times. Do not burn coal. The sulphur in coal will corrode the chimney.

Caution:

Keep combustible materials at least 48” (1.2 m) away from the front of the fireplace
opening.

Caution:

Never leave children unattended when there is a fire burning in the fireplace.

Caution:

Use only untreated wood. Wood protectors, metallic paper, coal, plastic, waste,
sulphur and/or oil will damage the fireplace.

Caution:

Do not use the LE LAVAL fireplace as an incinerator to burn paper, cardboard or
construction material such as pressed wood, plywood or lumber.

WARNING:

THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED GAS

LOG SET OR A FIREPLACE INSERT. TO REDUCE RISK OF FIRE OR
INJURY, DO NOT INSTALL AN UNVENTED GAS LOG SET OR A
FIREPLACE INSERT INTO THIS FIREPLACE.

«
1
2
3
4
5
...
»

Содержание LE LAVAL








































Отзывы:

Нет отзывов