Security Chimneys International LE LAVAL, Инструкция по установке и эксплуатации, Страница: 13 / 39

11
3.3.8 Door Adjustment
The doors are factory adjusted for proper air tightness and fit. They may need to be re-adjusted if
the alignment has shifted in freight.
To readjust the door side to side position, unscrew the fireplace or the door hinges. Move the
doors side to side until the top of the two doors are aligned (figure 6A). The gaskets‟ air-
tightness can be adjusted using the adjustment screw located on the slider stoppers. Turning the
screws clockwise will shorten the travel of the slider and increase the pressure on the door side
gaskets. This may lead to the doors being harder to lock, so a good adjustment must be found
between a good gasket seal and easy door lock (see figure 6B, balloon 1).
The door lock can also be adjusted. Remove the front refractory brick and loosen the two screws
in the middle front of the firebox bottom. Push or pull on the handle of the door lock. Pushing
the handle will tighten the door seal in the center of the fireplace. (Figure 6C).
Figure 6A
Figure 6B
Figure 6C