Security Chimneys International LE LAVAL, Инструкция по установке и эксплуатации, Страница: 14 / 39

12
3.3.8.1 Door Opening Adjustment
The doors opening angle can be adjusted. This allows the doors to slide in the fireplace without
interference or friction with the finishing facing, which could damage the paint. The screws
located under the bottom hinges (figure 6E)are used as door opening stops. Tightening or
loosening these screws will keep the door handle from hitting the finishing facing and won‟t
allow friction between door gasket and hearth when the door is fully pushed in the fireplace.
3.3.9 Bearing Maintenance
The doors are assembled on retractable sliders using roller bearings for easy movement. LE
LAVAL fireplace has been designed to ensure that bearing maintenance is easy. Remove the
decorative facing by unscrewing the four decorative caps and the four screws holding the facing.
Remove the doors by lifting them up from the female hinges (section 3.3.7). Remove the slider
stoppers (fig. 6B, balloon 2) and take the slider bearing assembly out of the fireplace. Unscrew
the nuts to change the bearings (fig 6D). Original bearing contains no grease to resist heat.
Adding grease or changing bearings with greased bearing may cause a malfunction of the slider.
Please use Security Chimneys Int‟l replacements parts only. (see page 38 for part #)
Figure 6D
Figure 6E