11
500-33530, Rev B
Installing the EcoPower Power Supply
NOTE 1:
Installation should be performed by a qualified service
person, who conforms to all local codes and complies with
The National Electrical Code (or equivalent).
NOTE 2:
The EcoPower Power Supply can be installed in either a
standard, existing 2-gang junction box (flush with the wall
stud), or the included enclosure box (flush with the wall stud
and drywall surface), or an enclosure surface mounted on
the wall.
Install the EcoPower Power Supply using the included
enclosure box (flush with the wall stud and wall surface)
NOTE:
Due to the location of the conduit knockouts on the included
plastic enclosure, the EcoPower Power Supply will finish with a
flush mount look.
1. DETERMINE location to mount the EcoPower Power Supply.
2. CUT a 4 5/8” by 4 5/8” hole in drywall.
