SafeLogic Xtreme Installation and Operation Instructions
Doc. No. XU-EC1501A-X151123
SecuRam Systems Inc.
Page 14
VERY IMPORTANT: The last number of your new combination cannot be set between 95 and 99 or
between 0 and 20 - this is called the “Forbidden Zone”. If the last number is set within the
Forbidden Zone, it will cause a condition that prevents the mechanism from operating correctly.
Step 2: Write down the new combination you would like to set in the mechanical combination
lock. This must be 3 numbers, for this example we will use the combination: 53-23-67
Step 3: Pull up on the SpinDial Release to disengage the electronics.
Step 4: Take note of the location of the Change Index. This is the small red arrow to the left of
Step 5: Rotate the SpinDial 4 times to the left, stop when you align the number “50” with the Change
Index.
Step 6: Now on the lock body (on the back of the safe door) locate the change key hole.
Step 7: Insert the Change Key into the change key hole until the key reaches the bottom of the
the Dialing Index.
Change Index
Change Index