SafeLogic Xtreme Installation and Operation Instructions
Doc. No. XU-EC1501A-X151123
SecuRam Systems Inc.
Page 15
lock case. You may have to wiggle the change key to get it to engage all 3 wheels. You
will know that the key is fully inserted when the Change Key tab is fully inside the lock
case.
Step 8: With the change key fully inserted through all 3 wheels, rotate the change key 90 degrees
to the left. This unlocks the wheels and allows you to set a new combination.
Step 9: Now with the change key unlocking the wheels, dial your new combination to the Change Index
as follows:
Step 10: Dial 4 complete revolutions left, until you see the number 53 lined up with the Change Index
and stop precisely on the number 53.
Step 11: Now dial to the right until the second number (23) is aligned with the Change Index for
the third time. (So pass the number 23 once, twice and stop on the third time.) Stop precisely
on this number.
Step 12: Now dial to the left until the third number (67) is aligned with the Change Index for the
second time. (So pass the number 67 once, and stop on the second time.) Stop precisely
on this number.
Step 13: Now on the lock side, rotate the change key back to the right to lock the wheels at the new
combination numbers.
Step 14: Test this new combination to make sure that it works correctly, before closing the safe
door. See Dialing a Mechanical Combination.
