6 X 10 PUSH BUTTON CENTER LOCK
www.crlaurence.com
Fax Orders (800) 262-3299
Phone Orders (800) 421-6144
C.R. Laurence Architectural Products
CENTER LOCK SYSTEM
2
INSTALLATION INSTRUCTIONS
SHEET 1 OF 2
OF SPANNER INTO POKEHOLE IN COLLAR OF DRIVE
REMOVE INSIDE LEVER BY INSERTING POINT
1
SLEEVE AND DEPRESSING RETAINING CLIP.
3
4
6
5
REFERS TO L1000 INSTALLATION INSTRUCTION
*
HANDBOOK FROM ILCO UNICAN
SEE STEP 10. INSTALLING INSIDE LEVER
*
CYLINDER ANTI-CLOCKWISE UNTIL IT IS FREE.
SEE STEP 11. INSTALLING COMBINATION CHANGE PLUG ASSEMBLY
REMOVE CYLINDER BY INSERTING KEY AND ROTATING
*
REMOVE INSIDE TRIM PLATE BY UNSCREWING THREAD RING
FROM DRIVE UNIT.
SEE STEP 9. INSTALLING INSIDE TRIM PLATE.
*
INSIDE LEVER
SPANNER
THREAD RING
KEY
CYLINDER
TRIM PLATE
THE TWO SECURING SCREWS
SEE STEP 7. INSTALLING REINFORCING PLATE.
REMOVE REINFORCING PLATE BY UNSCREWING
*
SEE STEP 5. INSTALLING LOCK.
REMOVE LOCK BY SLIDING IT FROM THE HOUSING.
*
SECURING SCREWS
REINFORCING PLATE
LOCK
HOUSING
REMOVE COVER PLATES
SEPARATE CLAMP PLATES BY REMOVING 4 CAP HEAD SCREWS
COVER PLATES
NUTS AND WASHERS.
SCREWS
WASHERS
WASHERS
NUTS
DOC # 1M003000
DL610LC, DL610RC, DL611LC, DL611RC
