Securam FPC-0601A-D66, Руководство по эксплуатации

Страница: 9 / 27

SECURAM Systems Inc. ScanLogic D66 Operation Guide Page 9
Notes:

If ID21 is selected, for example, the two users with TDO are: ID01 and ID21.

Even if ID21 is set with TDO, it will not be an administrator with more functions. ID01 and
ID02 are still administrators but ID02 will no longer have TDO capability.

If you select ID01, then ID01 will be the only user with TDO.

ID01 has TDO capability by default. However, in order to remove TDO capability from ID01,
select ID00 in the above programming sequence. This will remove TDO capability from
ID01 and only ID00 will have TDO capability.
9.2 Duress Time Delay (Level 3)
Step 1: Press “ Menu/OK ”. The screen will show “ Select Menu ”.
Step 2: Press “▲” or “▼” to select “ System Menu ”. Press “ Menu/OK ” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, the LCD shows “
Select Menu ”, press “▲” or “▼”
to select “ Set Duress Time Delay ”.
Step 5: Press “ Menu/OK ”. Press “▲” or “▼” to set the time between 0~99 minutes, press “ Menu/OK ”.
Step 6: Set the “TM window”
：
Press “▲” or “▼” to set the time between 01~15 minutes, press
“ Menu/OK ”.
Note :

TDO capability is still available to TDO Users.

Duress code can only be set by User ID00. (The menu selection to program Duress is “Duress
Code Shift”).
9.3 Time Delay: Unlock with an enrolled fingerprint or code (Level 3)
To unlock the safe lock when Time Delay has been programmed:
For example:
Time Delay is set 10 minutes and Time Window 5 minutes.
Step 1: Place an enrolled finger (ID: 03) on the fingerprint scanner and hold until the LCD shows:
Step 2: The display will start counting up. The LCD screen flashes the expired time interval every
15 seconds.
Step 3: When Time Delay finishes counting, two beeps will sound and the LCD screen will show:
Step 4: The display will start counting down. The LCD screen flashes with remaining time every 15
seconds.
Within the next 5 minutes, a User must verify an enrolled fingerprint to unlock. The LCD will display
the ID of the verified user:
Note:

As a default TDO User, ID 01 can unlock without time delay.