SECURAM Systems Inc.
ScanLogic D66 Operation Guide
Page 19
▪▪▪▪▪▪
Follow the same steps to set to Level 1.
Note:
After Security Level is changed, the number of locks will not be changed.
When security level is changed, all fingerprints and codes will be deleted. The first code (ID01) will be
set to default 123456.
23.1 Enroll the first fingerprint and its bound code (Security Level 2)
Step 1: With the ScanLogic D66 set to Security Level 2, place your finger on the fingerprint
scanner and hold.
The first fingerprint with an ID01 is enrolled.
Step 2: The display will prompt you to enter a code (6 digits).
Step 3: Enter the same code again.
When the screen shows “ID 01 Code Saved”, the first fingerprint and its bound code with ID01 is
enrolled successfully.
Note:
The default password (123456) will be deleted automatically after the first fingerprint and code
are enrolled successfully.
23.2 Enroll the second or additional fingerprints and its bound code (Level 2)
Step 1: Press “Menu/OK”. The screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System Menu”. Press “Menu/OK” again.
Step 3: Place the first enrolled finger on the scanner and hold. You will be prompted to enter your
Code.
After the fingerprint and its bound code are verified successfully, press “▲” or “▼” to select “Enroll
New User”.
Follow the same steps as to enroll the first administrator’s fingerprint and code to complete the
enrollment.
