SECOMX-945/N270
User Manual
- Rev. First Edition: 0.1 - Last Edition: 2.1 - Author: S.B. - Reviewed by G.M.
Copyright © 2011 SECO s.r.l.
SECOMX-945/N270
pag. 26
4.3 Advanced CMOS Configuration
After the selection of this choice, it will appear the following table:
The selections above mentioned are just as an example, they can be different from default values.
Most fields allow two selections:
Disabled / Enabled
i.e., there is only the chance of enable or disable corresponding operations during the system boot.
4.3.1 Display tests behaviour
Set this option to “
Disabled
” to eliminate the message visualisation during initial test.
4.3.2 Show Graphic Logo
This option allows enabling the visualisation of the graphic logo (a bitmap image 640x480 pixel in
16 colours) during the first steps of boot-up sequence. This image can be customised.
4.3.3 RAM test execution
This option allows disabling RAM test execution during boot phase, in order to allow a faster boot
up of the system.
4.3.4 NumLock State at Boot
This option allows defining the
NUMLOCK
state at Boot, delineating working mode of numeric
keypad.
4.3.5 Ignore keyboard error
When “
Enabled
”, in case of keyboard error during the boot phase, the system proceeds with the
normal boot sequence.
4.3.6 Typematic Programming
If enabled, it allows programming keyboard repetition speed.
4.3.7 Typematic Rate Delay
The typematic rate delay is the time that occurs before of the beginning of this repetition and it can
vary between 250, 500, 750 and 1000 msec.
