6
ENFORCER Vandal Resistant Flush-Mount Access Control Keypad
SECO-LARM U.S.A., Inc.
1
3/4
”
(44mm)
2
5/8
”
(66mm)
9/16
”
(15mm)
1
13/16
”
(46mm)
1
1/4
”
(31mm)
LED Indicators and Keypad Sounds:
Keypad Sounds and Amber LED
Status
Sounds
(1)
Amber LED (Center)
In programming mode
–
Steady ON
Successful key entry
1 Beep
1 Flash
Successful code entry
2 Beeps
2 Flashes
Unsuccessful code entry
5 Beeps
5 Flashes
Power up delay
Continuous beeping
Continuous flashing
Output relay activation
(2)
1-Sec long beep
–
In standby mode
(3)
–
1 Flash/sec
System restore mode
2 Beeps
Fast flashing for 2.5 min
Code already stored
1 Long beep
–
Real-time clock stopped after
power loss
Continuous 3 fast beeps
every 5 seconds
–
NOTE
:
1.
Keypad sounds can be programmed ON or OFF (see page 24).
2. Output relay activation sounds can be programmed for 1-Sec long beep, 2 short beeps, or OFF
(see page 25).
3.
Amber LED flashing during standby mode can be programmed ON or OFF (see page 25).
LED Indicators
Red LED (Left)
Amber LED (Center)
Green/Red LED (Right)
Steady
Output #2 activated
Programming mode
Output #1 activated (Green)
Output #1 inhibited (Red)
Flashing
–
Standby mode
Inhibit mode paused (Red)
Overview:
3
1/8
”
(80mm)
4
3/4
”
(120mm)
