23
ENFORCER Vandal Resistant Flush-Mount Access Control Keypad
SECO-LARM U.S.A., Inc.
3. In programming mode, clear the auto-disable time:
56 #
4. Temporarily pause or resume the auto-disable time:
2580 # 8
5. Activate output #1 during the auto-disable time (i.e. open the protected door):
2580 # 1
Programming the Output #1 Auto-Disable Time (continued):
Programming the Wrong-Code System Lock-Up:
The keypad can be programmed to lock up in order to secure the premises against unauthorized
entry if multiple wrong codes are entered.
When programming the wrong-code system lock-up, use this general formula:
60 aa #
60
– Program Wrong-Code System Lock-Up
AA
– Lock Options
Lock Options:
Choose from several different options for the wrong-code system lock-up security level:
•
1
– After 10 successive false attempts using incorrect user codes, the keypad will lock for 60
seconds (default).
•
2
– After 10 successive false attempts using incorrect user codes, the duress output will
activate. The duress output can be deactivated using any output #1 user code or via the super
user code.
•
5
to
10
– After 5 to 10 successive false attempts using incorrect user codes, the keypad
will lock for 15 minutes or until the super user code is used as follows:
SUPER USER CODE
# 9
•
00
– No system lock-up will happen.
NOTE
: The keypad’s red LED will remain lit to show that the keypad is locked. The duress code
will still function in this mode.
