Secap SI5200 Скачать руководство пользователя страница 179

Страница: 179 / 196

SV61611 Rev. B

8-35

Scanning • 8

The Selective Operations level of scanning contains marks that provide spe-

cial feeding instructions.

Mark

Purpose

DVS - Divert Sheets

When present, this mark indicates that the accumulation in

the Pre-fold Accumulator should be diverted into the divert

bin without folding or completing assembly.

ES - Envelope Select

When present, this mark indicates that dynamic envelope

selection should occur.

SL - Seal

This mark indicates the system should seal a Mail Piece. It

does not effect where the Mail Piece exits the system.
Seal marks can be either present or absent.
•

If Seal is set to

present

, and the Seal mark is on an

item, then the Mail Piece will be sealed. An item that

doesn't have the Seal mark will not be sealed.

•

If Seal is set to

absent

, and the Seal mark is on an

item, the Mail Piece will not be sealed. An item that

doesn't have the Seal mark will be sealed.

TIP:

This mark is useful when materials need to be hand-

stuffed into an envelope.

SF(n) - Select Feed

These marks instruct the machine to select material from

specific feeders. Up to nine Select Feed marks can be

within the code.
Only one item in a job can contain select feed information;

this item must be the first item scanned in the job.
All sheets or inserts for a single collation must be marked

with the same select feed pattern.
Select Feed marks can be either present or absent.

SN(n) - Select Next

This mark functions similar to Select Feed, but applies

to the next Mail Piece in the job. This is provided for

compatibility with older SECAP

™

inserters.

Select Next marks can be either present or absent.

Selective

Operations Level

Содержание SI5200





































































































































































































Результаты поиска

Содержание SI5200

Отзывы:

Похожие инструкции для SI5200

Бренды по названию

Популярные бренды

Secap SI5200, Руководство оператора

Результаты поиска

Содержание SI5200

Отзывы:

Похожие инструкции для SI5200

Бренды по названию

Популярные бренды