Secap SI5200, Руководство оператора

Страница: 154 / 196

8-10 SV61611 Rev. B
8 • Scanning
6. The Create Scan Code screen ap-
pears. Enter the character, bit and
size information on the BCR Scan
Configuration Worksheet for a func-
tion.
Refer to BCR and OMR Mark Levels
in this chapter for a brief description
of the function of each mark.
a. Use the UP/DOWN and LEFT/
RIGHT arrow keys to highlight an
item within the grid.
b. Press "Increase" or "Decrease" to
edit the character (C), bit (B) and
size (S) information for a specific
function (F).
Setting Up
a BCR Scan
Configuration
(continued)
Scan Grid
F C B S
MC 3 4 2
WAS 5 4 2
EOC 7 0 1
SF1 8 0 1
DVF 9 0 1
NOTES:
• On the BCR Scan Configuration Worksheet, look for the function abbrevi -
ation in the "Function" column. Enter the associated character information
in the "C" column, the bit information in the "B" column and, if necessary,
the size information in the "S" column.
• Bit 0 is the right-most bit (least significant) in each character:
- For Code 3 of 9 barcodes , bits are 5, 4, 3, 2, 1, and 0.
- For Interleaved 2 of 5 barcodes , bits are 2, 1, 0.
• Items with Character set to zero will no be included in the final code.
• For multi-bit fields, the entry in the "S" column depends on the code type.
For Bin, "S" is the number of bits. For CCD, "S" is the number of charac-
ters.
7. Select "Set Options". Use the table below to set the necessary options.
NOTE: The options that appear vary, depending upon the selected function.
Menu Option Associated Options/Actions
Use When Toggles:
•
Present, or
• Absent.
When
Present
is selected, the function will be performed
when the bit is "1".
When
Absent is selected, the function will be performed
when the bit is "0".
Count Direction Allows you to specify the count direction.
•
Up (default),
• Down, or
• Random (MC only).
When Up is selected, the relevant code’s binary value will
increase as the system scans each page.
When
Down is selected, the relevant code’s binary value will
decrease as the system scans each page.