Secap SI5200 Скачать руководство пользователя страница 158

Страница: 158 / 196

8-14

SV61611 Rev. B

8 • Scanning

Editing a

BCR Scan

Configuration

To edit a BCR Scan Configuration:
1. From the Home screen, select "Menu" then "Tools".
2. Select "Configure System" then "Scan Configuration Setup".

NOTE:

If you are not logged in with supervisor or manager access rights, you

will be prompted to enter an access code.

3. Select the appropriate scan type.
4. The Scan Configurations for the selected scan type display. Use the UP/

DOWN arrow keys to select the Scan Configuration you want to edit.

5. Select "Edit Highlighted Item".
6. The screen displays the scan grid with the available BCR functions for

the selected Scan Configuration. You can:

Menu Option

Associated Options/Actions

Increase

Allows you to increase the selected character, bit or size for

a function.
a. Use the UP/DOWN and LEFT/RIGHT arrow keys to

highlight the character (C), bit (B) or size (S) within the

grid.

b. Press "Increase" to edit the information for the

highlighted item.

Decrease

Allows you to decrease the selected character, bit or size for

a function.
a. Use the UP/DOWN and LEFT/RIGHT arrow keys to

highlight the character (C), bit (B) or size (S) within the

grid.

b. Press "Decrease" to edit the information for the

highlighted item.

Set Options

Allows you to edit the options for the selected mark. Refer

to the

Set Optons

table in the

Settng Up a BCR Scan

Confguraton

section of this chapter for more information

Scan Mark

Allows you to toggle the appropriate mark orientation:
•

Ladder, or

•

Picket.

PC Control

Allows you to toggle whether or not the PC Control is used:
•

Yes, or

•

No.

7. Select "Finished" when you are done.

Содержание SI5200





































































































































































































Результаты поиска

Содержание SI5200

Отзывы:

Похожие инструкции для SI5200

Бренды по названию

Популярные бренды

Secap SI5200, Руководство оператора

Результаты поиска

Содержание SI5200

Отзывы:

Похожие инструкции для SI5200

Бренды по названию

Популярные бренды