Secap SI5200 Скачать руководство пользователя страница 141

Страница: 141 / 196

SV61611 Rev. B

7-15

Add-On Modules • 7

The exit portion of the system accepts a variety of options. The Letter Drop

Stacker and the Flats Drop Stacker are standard options for all systems.

Exit Options

Mailing System

Interface (DP800i

or DP1000

only)

The Mail Machine Interface (MMI) enables communication between the in-

serter and the DP800i or DP1000 mailing systems via a USB connection.
The inserter sends start and stop signals to the mailing system, and the

mailing system can send error messages back to the inserter to stop feed-

ing.
• When the inserter starts the mailing system, it will toggle the Sealer to

“Off” and take control of the timeouts.

• The inserter monitors the number of pieces exiting the DP800i or

DP1000 in order to prevent the mailing system from being overloaded

with mail.

If the mailing system is overcome with mail, the inserter will pause until

the mailing system can process the mail and will then resume.

• When the mailing system is in maintenance mode, the inserter will

pause until the maintenance is complete.

• If you want to operate the mailing system in standalone mode, press the

Stop

key on the IntelliLink

Control Center. The inserter will finish creat-

ing any mail pieces in process. Press

Start

(at the mailing system) to

finish processing any pieces of mail on the feeder. Then, refer to your

the operating guide for you mailing system for instructions on processing

mail.

NOTE:

Once you have completed processing mail in standalone mode, press

the

Stop

key. To resume using the MMI Interface, start the inserter.

Running the Mail Machine Interface

Follow the steps below to process mail using the MMI.
1.  Power-up the inserting system.
2.  Power-up the mailing system.
3.  Ensure that the inserting system has been set up for the job:

• The job must be loaded.

NOTE:

The job must have "Use Postage Meter" option set to "On" for the

MMI to function. Refer to

Creatng a Job

Chapter 3 f

or more informa-

tion.

• The material must be loaded.
• A trial piece must be run successfully.

Содержание SI5200





































































































































































































Результаты поиска

Содержание SI5200

Отзывы:

Похожие инструкции для SI5200

Бренды по названию

Популярные бренды

Secap SI5200, Руководство оператора

Результаты поиска

Содержание SI5200

Отзывы:

Похожие инструкции для SI5200

Бренды по названию

Популярные бренды