Seat Media System 3.2, Руководство пользователя

Страница: 61 / 142

60 Navigation
During the copying process
If the

unit button is pressed, a message appears stating that navigation
data is currently being copied. The progress bar in the bottom line of the
screen shows the progress of the copying process.
The procedure is cancelled if the navigation DVD is removed using
Eject
.
● Press the
Notify
function button to resume copying and be informed
when the storing process has finished.
Nevertheless, the navigation data memory can only be used for navigation
when all navigation data has been fully copied. During the copying process,
route guidance is always started from the navigation DVD. If the navigation
DVD is removed, route guidance is cancelled and must be restarted.
If the unit is switched off during the copying process, the copying process
stops. Copying is resumed when the unit is switched on again, provided
that the navigation data medium is still available in the unit.
Copying finished
A message appears when copying is completed.
● Press the
Eject
function button to remove the navigation DVD.
●
OR: If you have already started route guidance from the navigation DVD,
press the
Cancel
function button to leave the navigation DVD in the unit un-
til route guidance is completed.
Note
After copying, you should keep the navigation DVD in a safe place in the ve-
hicle, in case you want to replace the data in the unit by data from another
navigation DVD as a transitional measure.

Navigation main menu
Fig. 45 Navigation main
menu: destination mode
Fig. 46 Navigation main
menu: tour mode
The navigation functions are only enabled when navigation data for the cur-
rent area are available in the radio-navigation system
⇒
page 59.
