Seat Media System 3.2, Руководство пользователя

Страница: 102 / 142

101 Navigation
Autozoom
If Autozoom is active, the map scale is adjusted automatically, depending
on the route (small scale for driving on the motorway and a large scale for
driving in town).
● Press the

function button to switch autozoom on or off.
When autozoom is activated, the map is automatically centred on the cur-
rent vehicle position

.
Furthermore,

is displayed in the function button for showing the selected
map scale.
“Autozoom” is switched off if the map scale has been changed manually.

Changing the display type (map type)
The symbol shown in the second function button

,

or

shows the
currently selected display type.
●
Press the function button and press a map display type to select it.

2D : Two-dimensional, from above (conventional).

3D : Three-dimensional, from the front at an angle (as would be seen ap-
proaching from an airplane).

Topographic : Two-dimensional, with colour display of landscape forms
(mountains, valleys etc.).

Browsing the map, moving the map section
Fig. 88 3D map display
during route guidance
(map section moved)
●
In order to move the displayed map section, place your finger on the
screen and, without lifting it off, drag it over the screen.
This function is used for browsing the map and, for example, looking for
points of interest in the vicinity of the vehicle position

. A point of interest
can then be selected from the map as a destination
⇒
page 62.
Centring the map display on the vehicle position

The

function button is displayed at the top right if the screen section has
been moved
⇒
Fig. 88 .
● Press the

function button to centre the map on the current vehicle po-
sition

again.
If autozoom is activated, the map is automatically centred on the current ve-
hicle position

⇒
page 101.
