Seat Media System 3.2, Руководство пользователя

Страница: 54 / 142

53 Audio mode
Note
The way in which TV stations and broadcasting groups transmit their IDs is
the responsibility of the particular station.

Browsing TV channels manually
● In the TV menu, press the
Extras
function button.
● In the pop-up window, press the
Manual
function button.
● The pop-up window is closed and the
Extras
function button changes to

Manual
.
● Briefly press the arrow buttons on the unit or on the screen.
The TV channels are scanned one after another according to their sequence
on the waveband – irrespective of whether they are occupied or not.
● Press the

Manual
function button or the setting knob
⇒
Fig. 1
8
to
close manual frequency selection.
You can also browse TV channels and digital TV stations by turning the set-
ting knob.

Memory list
Fig. 41 Memory list with
3 digital and one ana-
logue TV station.
Opening and closing the preset list
● In the TV menu, press the
Presets
function button to open the presets list
⇒
Fig. 41 .
The currently selected TV station is shown in the top line of the screen. Pre-
viously stored TV stations and all the available memory locations are dis-
played in a list below.
● Press the

function button to close the preset list.
Storing current TV stations
● In the memory list, press the
Store
function button to store the current
TV station to a memory location
⇒
Fig. 41 .
●
Following this, press to select the desired preset location.
If you select a preset location where another station is stored, the other sta-
tion will be overwritten.
When a TV station is stored, the “station ID” is stored, i.e. the name broad-
cast by the TV station
⇒
page 52.
