62
Trouble Shooting
Problem
Remedy
Lantern will not activate.
• Ensure Lantern is in darkness;
• Wait at least 60 seconds for the program to initialise in darkness;
• Ensure battery terminals are properly connected;
• Ensure battery voltage is above 12volts;
• Check the status of the LED’s on the base of the PCB to determine what
type of fault the light is acting (see Lantern Status section of this manual).
Lantern will not operate for
the entire night.
• Expose the lantern to direct sunlight and monitor operation for several days.
• Sealite products typically require 1.5hours of direct sunlight per day to retain
full autonomy. From a discharged state, the lantern may require several days
of operational conditions to ‘cycle’ up to full autonomy;
• Reducing the light output intensity or duty cycle (Flash Code) will reduce
current draw on the battery;
• Ensure solar module is clean and not covered by shading during the day.
Sealite LED Light Warranty
Refer to Sealite website:
sealite.com
