Sealite SL-C510 страница 37 Скачать руководство пользователя | Manualshive

Страница: 37 / 63

background image

SL-C510

Compact 5-9NM Solar Marine Lantern

Latest products and information available at

www.sealite.com

37

Questions

Answer

When I press ‘Connect via Bluetooth’, I
see the message ‘An App/ SealitePro

®

wants to turn on Bluetooth’.

When I select ‘Connect via Bluetooth’,
the device performs a scan but tells
me that no lanterns were found.

Connecting to a lantern via Bluetooth requires that the mobile
device has Bluetooth turned on. If this message appears it is
because the device’s Bluetooth module is turned off. Press ‘Allow’
and SealitePro

®

will attempt to turn the Bluetooth device on. If

required, you may turn Bluetooth off when fi nished through the
device’s ‘Settings’ App. If you press ‘Deny’ then
connection will be cancelled.

Several conditions may occur that will prevent lanterns from
being
discovered.
1. Verify that a Bluetooth-equipped Sealite lantern is nearby and
powered on.
2. Verify that no other mobile device is connected to the lantern
via Bluetooth. Bluetooth supports only one connection at a time,
therefore if another device is connected it must be disconnected
before the lantern appears in a scan result.
3. Turn the Bluetooth feature of the mobile device off and on
again. This may be performed through the Android

®

Notifi cation

Bar of some devices or through the Settings App. See your
device user manual for full
instructions.
4. Some Android

®

devices require Location Services to be

enabled before they will ‘see’ Bluetooth lanterns. Location
Services may be enabled through the Android

®

Notifi cation Bar of

some devices or through the
Settings App. See your device user manual for full instructions.
5. Turn the lantern off and then on again.
6. Ensure your device is within its Bluetooth range.
If the problem persists, please contact Sealite for assistance.

I have connected to a lantern via
Bluetooth, but the message “Lantern
Comms Failure. Retrying…” keeps
appearing.

Try disconnecting from the lantern, then rescanning and
connecting. It is possible that the lantern is at the edge of the
Bluetooth range, or maybe the data connection is unreliable. If the
problem persists, please contact Sealite for assistance.

«
...
35
36
37
38
39
...
»

Содержание SL-C510
































































Отзывы:

Нет отзывов

Похожие инструкции для SL-C510

Бренд: Adventuridge Страницы: 14

Бренд: Sulion Страницы: 4

Бренд: Naber Страницы: 22

Бренд: Quoizel Страницы: 7

AC65 T8 HF Series

Бренд: Knightsbridge Страницы: 4

Бренд: Duraflame Страницы: 2

Бренд: Classy Caps Страницы: 2

American Electric Lighting ATB0 Series

Бренд: Acuity Brands Lighting Страницы: 2

SIMPLESEAL CTD Series

Бренд: kenall Страницы: 3

Бренд: Gama Sonic Страницы: 4

Бренд: easymaxx Страницы: 4

Бренд: LED Linear Страницы: 3

CROUSE-HINDS EXIT Series

Бренд: Eaton Страницы: 8

Scout WL Dark Grey

Бренд: Qazqa Страницы: 2

Бренд: Harbor Freight Tools Страницы: 8

Бренд: Harbor Breeze Страницы: 10

ECODRIVE 8000 AQ08300

Бренд: Zener Страницы: 2

Бренд: Westfalia Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды