46
IR Controller Security PIN
The IR Controller allows to create a four-digit numbers security access PIN, this will prevent accessing
or modifying the SL-510 settings. Once the Security PIN is set this it will lock the lantern immediately.
In order to access the light settings, the Unlock PIN command needs to be used, this will allow access
to the light settings for 30 minutes then the light will re-lock again. If the entered Security PIN does not
match, the lantern will respond with 5 quick fl ashes indicating the PIN is incorrect.
Pressing the following key sequence will set the light Security PIN:
Where: X = 0 to 9-digit numbers
Pressing the following key sequence will unlock the light for 30 minutes:
Where: X = 0 to 9-digit numbers
Clear or set a new IR Security PIN
To clear the security access PIN the light requires to be switched off then on. The action will allow to
enter the following key commands to clear the existing Security PIN:
Once the security access PIN is cleared a new PIN can be entered using the Security PIN set
command.
NOTE: The above key command requires to be entered within four minutes, once the time elapses the
light will PIN lock again.
I
L
L
R
T/C
T/C
X
L
I
X
X
X
X
X
X
X
T/C
T/C
L
L
I
L
T/C
T/C
FC FC FC FC