Sealite SL-C510 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 63

Sealite SL-C510 Скачать руководство пользователя страница 5

SL-C510

Compact 5-9NM Solar Marine Lantern

Latest products and information available at

www.sealite.com

5

SL-C510

Compact 5-9NM Solar Marine Lantern

The SL-C510 is a robust, completely self-contained 5-9 NM Solar LED Lantern specifi cally designed to
withstand the tough marine environment to provide years of reliable, low maintenance service. The 3 & 4
hole bolt pattern base fi ts directly onto existing 200mm bolt pattern industry standard mounts for ease of
installation.

The four (4) premium-grade solar modules are integrated into the assembly, and mounted to collect sunlight at
all angles.

The base and top of the lanterns are made from composite moulded polymer with UV-stabilised rubber
corners and gaskets providing a superior IP68 – the best in the industry. A handle is incorporated into the
chassis for safe lifting.

The tough, polycarbonate lens is specifi cally designed for use with LEDs and incorporates an environment-
friendly spike to deter unwelcome bird life. The lens design also ensures that vessel operators clearly see the
light from above when passing the AtoN. The design incorporates a conveniently located OLED (Organic
Light-Emitting Diode) screen with touchpad allowing maintenance personnel to check the diagnostics of the
lantern with the touch of a button.

Completely programmable via the new Bluetooth

®

connected SealitePro

®

mobile application, the SL-C510

can be confi gured and monitored from a distance up to 50 metres. An in-built solar calculator confi rms the
lanterns ability to operate at the set location, ensuring optimal operating performance.

The SL-C510 is available with GPS Synchronisation as standard. Two (2) or more lights can be synchronised to
fl ash in unison via an internal GPS module.

The SL-C510 may also be fi tted with Satellite Communications Module or GSM Module – enabling users to
access real-time diagnostic data and change lantern settings. The system can also be confi gured to send out
alarm messages to designated phone numbers. Users can also have alarms and reports sent to designated
email addresses.

All this is backed by Sealite’s industry leading 3-year warranty.

OLED Display for Lantern
Status check

LED Optic

Robust composite moulded base and

top with handle, Aluminium chassis

with rubber extruded corners

3 & 4 hole 200mm bolt pattern

base for ease of installation

4 x monocrystalline solar modules,
ensuring maximum light collection to
charge the battery

Internal Battery

«
...
3
4
5
6
7
...
»

Содержание SL-C510
































































Отзывы:

Нет отзывов