Garden
Shed
2.3 x 2.3 x 2.4m
66
66
26A
26B
26F
26E
S16
S27
S17
Step 4:
Assemble the roof panels
Place parts S16, S27 and S17 (sheeting) on your worktable and join together with self-tapping screws as per the diagram below.
Enhance the structural strength by applying part 66 (channel connector). Note that screws are applied to both sides of the connectors.
ROOF TOP EDGE
RIDGES FACING UP
Fix parts 26F, 26E, 26A and 26B (channels) using self-tapping screws as per the diagram below. Please ensure parts 26A and 26B
are attached to the side of sheeting which has pre-punched holes as per the diagram below. Make sure the small lip on the channel is
always facing out. This ensures rain water cannot build up inside your shed.
ROOF TOP EDGE
RIDGES FACING UP
GSS2323/G | Issue:2(SP) 13/04/17
Original Language Version
© Jack Sealey Limited
Step 4:
Assemble the roof panels
P
lace parts S16, S27 and S17 sheeting on your worktable and join together with self tapping screws as per the diagram below.
F
ix parts 26F, 26E, 26A and 26B (channels) using self tapping screws as per the diagram below. Make sure the small lip on the channel is
always facing out. This ensures rain water can not build up inside the shed.
E
nhance the structural strength by applying part 66 (channel connector). Note that screws are applied to both sides of the connectors.