Garden
Shed
2.3 x 2.3 x 2.4m
The door can be hinged on the opposite side as well. Align the door with the edge and make holes using a cordless drill.
Remove pins from the hinge and reverse their direction before you attach the door. If you are concerned about the visibility of
any pre-drilled holes you can fill them with rivets. Perform the same procedure for the pad bolt.
FIXW ITH4 .0*10MM RIVET
FIX WITH 4.0 X 10MM RIVETS
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
GSS2323/G | Issue:2(SP) 13/04/17
Original Language Version
© Jack Sealey Limited
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
The door can be hinged on the opposite side as well. Align the door with the edge and make holes using a cordless drill. Remove pins from the
hinge and reverse their direction before you attach the door. If you are concerned about the visibility of any pre-drilled holes they can be filled in
with rivets. Perform the same procedure for the pad bolt.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.