Garden
Shed
2.3 x 2.3 x 2.4m
S17
94L
AFTER ATTACHING BOTH ROOF
PANELST OW ALLS AS SHOWN ABOVE,
DRILLT HE HOLES THROUGHB Y3 MM
DRILLB IT FORT HE ROOFB RACE AND
FIX IT TO THER IDGE BEAMA ND FRONT
WALL AS SHOWN. REPEAT THE SAME
STEP FORT HE ROOFS IDE.
THEN REPEATT HISP ROCEDUREF OR
THE REARW ALLR OOFB RACE
96
54
54
54
54
54
Step 7:
Fit the panels together (continued)
Repeat the same step for the other assembled roof panel. Drill holes for roof brace using 3mm drill bit. Then fix the roof brace as
per diagram below. Join the sheeting and the gable using part 54 (lip) and then fix the 4 corners using 16mm self-tapping screws.
Note:
Do
not
fix central screws marked with a cross at this stage).
After attaching both roof panels to
the walls, Drill holes through the roof
brace using a 3mm drill bit and fix
brace to the ridge beam and channel
above door as per the diagram on
the left. Repeat this step for the rear
wall roof brace.
PARTS 26A AND
26B (CHANNELS)
ON THIS END
PARTS 26E AND 26F
(CHANNELS) ON THIS END
GSS2323/G | Issue:2(SP) 13/04/17
Original Language Version
© Jack Sealey Limited
Step 7:
Fit the panels together (continued)
R
epeat the same step for the other assembled roof panel. Drill holes for roof brace using 3mm drill bit. Then fix the roof brace as per diagram
below. Join the sheeting and the gable using part 54 (lip) and then fix the 4 corners using 16mm self tapping screws. Note: Do not fix central
screws marked with a cross at this stage.
After attaching both roof panels to the walls, drill
holes through the roof brace using a 3mm drill bit
and fix the brace to the ridge beam and channel
above the door, as per the diagram on the left.
Repeat this step for the rear wall roof brace.
