Sealed Air SeleCTech, Руководство пользователя

Страница: 33 / 64

Section 3. Operation
SLCT-FAL5645 Sealing Machine
© Sealed Air Corporation (US)
MM-0110; Revision 1-A: 11/01/2013 3-9
Figure 3–8 Selvage Reel
12. Switch the conveyor ON, put the packing product on the conveyor and make sure that your
hands are completely away from the conveyor surface.
13. Adjust the sealing and cutting process as necessary. (Figure 3–9 ).
Figure 3–9 Sealing and Cutting Adjustment
14. Adjust of the front extra fi lm length (Length A of Figure 3–9 ), to the best length
approximately 1/3 H. The adjustment procedure is as follows:
a. When A is too long, shorten the distance between the sensor and the sealing blade by
increasing the conveyor time setting on switch #16 in Figure 3-1.
b. If A is too short, adjust the conveying time for the extra fi lm length at the front of the
product, increasing the conveying time to increase the extra fi lm length at the front of the
box.
Selvage Path
Illustration
Conveyor Direction
Film Seal Line
Selvage Reel
Cover Lock