Sealed Air SeleCTech, Руководство пользователя

Страница: 35 / 64

Section 3. Operation
SLCT-FAL5645 Sealing Machine
© Sealed Air Corporation (US)
MM-0110; Revision 1-A: 11/01/2013 3-11
• When the products are in rectangular or square shape, Standard sensor mode should be
applied.
• If the packing products are an irregular shape or transparent, then the Point-to-point
Compensation sensor mode should be applied and the Conveying Time switch adjusted to
control the fi lm length.
Figure 3–11 Packing Product Sensor Mode
18. The sealing blade of this machine can be used on the POF and PE Shrink Film. When using
on the PE Shrink Film, the sealing blade must be covered by heat-resisted adhesive tape to
prevent the blade from directly contacting the PE fi lm.
Packing Product
Optical Sensor
Packing Product
Optical Sensor
Heat-resisted Adhesive Tape
Protective Plate
Sealing Blade