Sealed Air SeleCTech, Руководство пользователя

Страница: 30 / 64

Section 3. Operation
SLCT-FAL5645 Sealing Machine
© Sealed Air Corporation (US)
MM-0110; Revision 1-A: 11/01/2013
3-6
Figure 3–4 View FAL 5645 from the Infeed end
6. Put the shrink fi lm onto the Film Unwind rollers (see Figure 3–5 ).
a. Loosen the locking nut of the left side fi lm positioning rod (1) and adjust the fi lm
location. Tighten the locking nut after adjustment
b. Loosen the locking nut of the right side fi lm positioning rod (2) and adjust the rod to
width of the shrink fi lm + 5 mm. Tighten the locking nut after adjustment.
c. The open side of the shrink fi lm must face to the fi lm positioning rod (2).
Product Guide
is mounted
to side of the
machine
Inverting Heads
above and
below infeed
conveyor