Sealed Air SeleCTech, Руководство пользователя

Страница: 14 / 64

Section 1. General Information
SLCT-FAL5645 Sealing Machine
© Sealed Air Corporation (US)
MM-0110; Revision 1-A: 011/01/2013
1-10
1.1.4 Energy Isolation
The following guidelines are provided to establish a minimum requirement for the disconnection/
isolation of energy sources whenever maintenance or service is performed on equipment and
associated parts. It is further advised that an independent safety study be performed on the
machinery, its installation, and Lockout/Tagout procedures.
CAUTION
Prior to following any maintenance or troubleshooting procedures
outlined in this manual, review these important steps.
1. Read all warnings and cautions listed in this manual’s Safety Section (“1.1 Safety Section”
on page 1-3) and throughout this manual.
2. Shut the equipment down using normal stopping procedure then engage the Emergency Stop
(E-Stop) push button switch by pushing it down.
3. Ensure that all controls are in a neutral or OFF position.
4. The equipment may be isolated from its energy sources by unplugging the main power cord.
5. Then applicable, the equipment may be isolated from pneumatic sources by disconnecting
the main air line.
6. Follow the appropriate Lockout/Tagout recommendations at your facility during shutdown,
maintenance, and restart of the equipment.