INSTALLATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 26 / 20HD
90265
7
17 of 21
Section 1: MECHANICAL INSTALLATION
9) Lift installation fixture clear of
foundation. Apply Seakeeper
provided adhesive backed foam
strips at the eight locations shown
(each end of four saddles) in
Figure 10 below. These strips are
to serve as a dam to minimize
adhesive escaping out the ends of
the saddles as they are positioned
over the bond area.
Note if bonding saddles to a non-composite hull, contact Seakeeper for hull preparation
instructions.
FIGURE 12
– FOAM STRIP INSTALLATION
