manualshive.com logo in svg

Seagate STT20000N, Руководство по эксплуатации продукта

Поделиться
Скачать
Seagate STT20000N Скачать руководство пользователя страница 40

Chapter 4

Drive operation and maintenance

Page 32

STT20000A Product Manual

Figure 4-6
Cleaning the drive head and capstan

Capstan

Tape Head

Troubleshooting

If a power interruption occurs during a backup or restore operation, start over when
the power is restored. If the drive appears to fail during a backup or restore
operation, try the following steps:

1.

Remove and replace the cartridge and try again. Make sure you are using the
correct type of tape cartridge.

2.

Turn off all power to the computer and drive. Wait for the computer to power
down and then start over.

3.

Try a different tape—preferably one that has never been used.

4.

Check all cable connections for proper contact.

5.

Clean the tape drive head as previously instructed. Then try the operation
again.

If problems persist, contact your tape drive supplier or Seagate technical support at

US and Canada

1-800-SEAGATE  (1-800-732-4283)

Outside US and Canada

1-405-936-1234

Seagate Web Site

http://www.seagate.com

Seagate BBS

1-405-936-1630

Before you call technical support, be sure that you have the documentation for your
computer and for all installed periferal devices.

Содержание STT20000N







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды