Sea Tel DAC-2202, Инструкция по установке и эксплуатации

Страница: 94 / 115

Maintenance & Troubleshooting DAC-2202 Antenna Control Unit
8-8
8.9. Communication Port Settings
Number Description
1 The IP Address field displays the Static Internet Protocol address value currently stored in the
Comm IF module (Flash). To change the IP address to match an existing LAN info structure, type
in the desired value and click on the
SUBMIT button. If the parameter change causes desirable
operation click on the SAVE button to store value to memory. This address must conform to the
nnn.nnn.nnn.nnn format where nnn is a number between 0 and 255.
2 The Net Mask field displays the Subnet Mask address value currently stored in the Comm IF
module. To change the Subnet to match an existing LAN info structure, type in the desired value
and click on the
SUBMIT
button. If the parameter change causes desirable operation click on the
SAVE button to store value to Flash. This address must conform to the nnn.nnn.nnn.nnn format
where nnn is a number between 0 and 255.
3 The Gateway field displays the Static Gateway Internet Protocol address value currently stored in
the Comm IF module. To change the Gateway IP address to match an existing LAN info structure,
type in the desired value and click on the
SUBMIT button. If the parameter change causes
desirable operation click on the SAVE button to store value to Flash. This address must conform
to the nnn.nnn.nnn.nnn format where nnn is a number between 0 and 255.
4 The TCP Port 0 field displays the Transmission Control Protocol Port 0 value currently stored in
the Comm IF Module. To change the Port value to match an existing LAN info structure, type in
the desired value and click on the
SUBMIT button. If the parameter change causes desirable
operation click on the SAVE button to store value to Flash. This address must conform to the
nnnn format where nnnn is a number between 0 and 65535.
5
The TCP Port 1 field displays the Transmission Control Protocol Port 1 value currently stored in
the Comm IF Module. To change the Port value to match an existing LAN info structure, type in
the desired value and click on the
SUBMIT button. If the parameter change causes desirable
operation click on the SAVE button to store value to Flash. This address must conform to the
nnnn format where nnnn is a number between 0 and 65535.
6 The OpenAMIP Port field displays the Open Antenna-Modem Interface Protocol port value.
This port is specifically used to communicate with an “Open AMIP” compatible satellite modem
and should not be changed from the factory default.
7 The UDP Port displays the User Datagram Protocol Port value stored in the Comm IF Module.
This port is specifically used to perform software upgrades to the Comm IF Module and should
NOT be changed.