9711 C & Ku-Band TXRX
Maintenance
16-1
16.
Maintenance
This section describes the maintenance procedures for this antenna system. Also refer to the Troubleshooting section of this
manual for troubleshooting details.
WARNING:
Electrical Hazard – Dangerous AC Voltages exist in the Breaker Box and
the Antenna Pedestal Power Supply. Observe proper safety precautions when working
inside the Antenna Breaker Box or Power Supply.
WARNING:
RF Radiation Hazard - This stabilized antenna system is designed to be
used with transmit/receive equipment manufactured by others. Refer to the
documentation supplied by the manufacturer which will describe potential hazards,
including exposure to RF radiation, associated with the improper use of the
transmit/receive equipment. Note that the transmit/receive equipment will operate
independently of the stabilized antenna system.
The ultimate responsibility for safety rests with the facility operator and the
individuals who work on the system.
WARNING:
RF Radiation Hazard - Prior to working on the stabilized antenna system,
the power to the
transmit/receive
equipment must be locked out and tagged.
Turning OFF power to the Antenna Control Unit does NOT turn Transmit power
output OFF.
The ultimate responsibility for safety rests with the facility operator and the
individuals who work on the system.
WARNING:
RF Radiation Hazard - When the transmit/receive system is in operation, no
one should be allowed anywhere within the radiated beam being emitted from the
reflector.
The ultimate responsibility for safety rests with the facility operator and the
individuals who work on the system.
16.1.
Warranty Information
Sea Tel Inc. supports these systems with a TWO year warranty on parts and labor.
What’s Covered by the Limited Warranty?
The Sea Tel Limited Warranty is applicable for parts and labor coverage to the complete antenna system, including all
ADE (radome, pedestal, antenna, motors, electronics, wiring, etc.) and the ACU or MXP.
What’s NOT Covered by the Limited Warranty?
It does not include Transmit & Receive RF Equipment, Modems, Multiplexers or other distribution equipment, whether
or not supplied by Sea Tel commonly used in Satellite Communications (TXRX) Systems. These equipments are
covered by the applicable warranties of the respective manufacturers.
Original installation of the system must be accomplished by, or under the supervision of, an authorized Sea Tel dealer
for the Sea Tel Limited Warranty to be valid and in force.
Should technical assistance be required to repair your system, the first contact should be to the agent/dealer you
purchased the equipment from.
Please refer to the complete warranty information included with your system.
Содержание 9711 C
