manualshive.com logo in svg

Sea-doo 2003 LRV DI, Руководство оператора, Страница: 66 / 88

Поделиться
Скачать
Sea-doo 2003 LRV DI Скачать руководство пользователя страница 66

64

General Inspection and 
Cleaning

Inspection

Check engine compartment for any dam-
age and fuel/oil injection systems for
leaks. Ensure all hose clamps are proper-
ly secured and no hose is cracked, kinked
or presenting any other damage.

Inspect muffler, battery, fuel tank and
oil reservoir fastening devices. Visually
check electrical connections for corro-
sion and tightness.

Inspect hull and jet pump water intake
grate for damage. Replace or have dam-
aged parts repaired.

Cleaning

The bilge should be cleaned by an au-
thorized SEA-DO dealer to remove any
fuel/oil/electrolyte deposits and mil-
dew.

Occasionally, wash the body with wa-
ter and soap (only use mild detergent).
Remove any marine organisms from
engine and/or hull. Apply non-abrasive
wax such as silicone wax.

CAUTION:

Never clean fiberglass and

plastic parts with strong detergent,
degreasing agent, paint thinner, ace-
tone, etc.

Stains may be removed from seat and
fiberglass with Knight’s Spray-Nine
from Korkay System Ltd or the equiv-
alent.

Respect the environment by ensuring
fuel, oil or cleaning solutions do not
drain into the waterways.

WARNING

If any gasoline leak and/or odor are
present, do not start the engine.
Have the watercraft serviced by an
authorized SEA-DOO dealer.

WARNING

Periodically verify the seat lock pin
and tighten if needed. Make sure
seat securely latches.

smo2003-005a.book  Page 64  Friday, November 1, 2002  8:25 AM

Содержание 2003 LRV DI

























































































Отзывы:

Нет отзывов