Sea-doo 2003 LRV DI Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 88

Sea-doo 2003 LRV DI Скачать руководство пользователя страница 16

14

YOUR EMISSION CONTROL WARRANTY RIGHTS AND OBLIGATION

The California Air Resources Board and BOMBARDIER on behalf of BOMBARDIER MOTOR
CORPORATION OF AMERICA (BMCA) are pleased to explain the emission control system
warranty on your 2002 SEA-DOO RX™ DI, SEA-DOO GTX† DI and SEA-DOO LRV™ DI
personal watercraft engine. In California, new personal watercraft engines must be de-
signed, built and equipped to meet the State’s stringent anti-smog standards. BOMBARDIER
must warrant the emission control system on your personal watercraft engine for the periods
of time listed below provided there has been no abuse, neglect or improper maintenance of
your personal watercraft engine.
Your emission control system may include parts such as the fuel injection system or the
ignition system. Also included may be hoses, connectors and other emission-related as-
semblies.
Where a warrantable condition exists, BOMBARDIER will repair your personal watercraft
engine at no cost to you including diagnosis, parts and labor provided that such work is
performed by an authorized BOMBARDIER dealer.

Manufacturer’s Limited Warranty Coverage

This emission limited warranty covers model year 2002 SEA-DOO RX™ DI, SEA-DOO
GTX

†

DI and SEA-DOO LRV™ DI personal watercraft engine certified and produced by

BOMBARDIER for sale in California, that are originally sold in California to a California
resident. The BOMBARDIER North America Limited warranty conditions for Sea-Doo
watercraft are still applicable to these models with the necessary modifications.
Select emission control parts of your 2002 SEA-DOO RX™ DI, SEA-DOO GTX

†

DI and SEA-DOO

LRV™ DI personal watercraft engine are warranted from the date of delivery to the first retail
consumer for a period of 4 years, or for 250 hours of use, whichever occurs first. However,
warranty coverage based on the hourly period is only permitted for personal watercraft equipped
with the appropriate hour meters or their equivalent. If any emission-related part on your engine
is defective under warranty, the part will be repaired or replaced by BOMBARDIER.

Parts covered are:

Air lines

Coolant temperature sensor

Fuel rail

Throttle position sensors

Rave valve

Ignition coil

Reed valve

Manifold temperature sensor

Tuned pipe

Manifold air pressure sensor

High-tension ignition wires

Crankshaft position sensor

Electrical harness

Air pressure regulator

Throttle bodies

Fuel pressure regulator

Exhaust hoses

Fuel injectors

Fuel lines

Electronic control module

Water regulator

Exhaust manifold

Air compressor

Fuel pump

Cylinder head

Air injector

Detonation/ knock sensor

All emission component related gaskets;
head, base and exhaust

smo2003-005a.book Page 14 Friday, November 1, 2002 8:25 AM

«
...
14
15
16
17
18
...
»

Содержание 2003 LRV DI

























































































Отзывы:

Нет отзывов