System Operation Manual
SAT-DN-00434, Rev. B
LOBO
2017-05-16
Page 68 of 86
Copyright
2017 Sea-Bird Scientific. All rights reserved.
9.
Next, let’s select the output file naming convention. Select
Conversion -> File Naming
, then configure
the dialog as shown; this will automatically name the converted file based on the log file and instrument
file. Click OK to close the dialog when you are finished.
10.
Select the raw file and the instrument file that you wish to perform the conversion on. For this test,
we want to look at data from the WQM sensor. Notice the output file name is automatically created
in the
Next:
box.
11.
Press the blue exclamation point (
!
) or select
Conversion -> Convert
to begin the data conversion. Click
OK if SatCon gives warnings about not finding valid frame counter and checksum sensors
–
this is
